| Customization: | Available |
|---|---|
| Certification: | CE, GMP, ISO |
| Condition: | New |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
In pharmaceutical industry, there are various pharma company manufactures types of machineries for the different process and application as per there specialty. There are vast categories of pharma machineries as each process requires different machineries. Such as Pharma machines for Tablet filling, Machines for Tablet Counting, Machines for Tablet Pressing, and Machines for Tablet Labeling etc.
In the capsule manufacturing process first gelatin and hot demineralized water are mixed under vacuum in Gelatin Melting System. After aging in stainless steel receiving tanks, the gelatin solution is transferred to stainless steel feed tanks. Dyes, opacifants, and any needed water are added to the gelatin in the feed tanks to complete the gelatin preparation procedure. The feed tanks are then used to gravity-feed gelatin into the machine for making capsules.
From the feed tank, the gelatin is gravity fed to dipper section. Here, the capsules are moulded onto stainless steel Pin Bars which are dipped into the gelatin solution. Once dipped, the Pin Bars rise to the upper deck allowing the cap and body to set on the Pins. The Pin Bars pass through the upper and lower kilns of Capsule Machine Drying System. Here gently moving air which is precisely controlled for volume, temperature, and humidity, removes the exact amount of moisture from the capsule halves. Precision controls constantly monitor humidity, temperature, and gelatin viscosity throughout the production process.
Once drying is complete, the Pin Bars enter the Table section which positions the capsule halves for stripping from the Pins in the Automatic section. In the Automatic section, capsule halves are individually stripped from the Pins. The cap and body lengths are precisely trimmed to a ±0.15 mm tolerance. The capsule bodies and caps are joined automatically in the joiner blocks. Finished capsules are pushed onto a conveyer belt which carries them out to a container. Capsule quality is monitored throughout the production process including size, moisture content, single wall thickness, and color. Capsules are sorted and visually inspected. Capsules are now ready to be sterilized and packaged.
| Adjust new mould time: | 5-8 minutes (for beginner) |
| Production capacity: | 10000-25000 capsules/hour (depends on the capsule size) |
| Suitable capsule: | 000#,00L#,00#,0L#,0#,1#,2#,3#,4#,5# mechanical made standard capsule. |
| Filled material: | Powder (without wet or sticky); granules. |
| Total power: | 2.12KW |
| Compressed air: | 0.03m 3 /min, 0.7Mpa |
| Vacuum pump: | Exhaust 40m 3 /h |
| Overall dimension: | 1200*700*1650mm |
| Packing dimension: | 1650*800*1750mm |
| Gross Weight: | 420 KGS |
){kind=link}